Machining Demo Archives - Page 3 of 5 - KYOCERA SGS Precision Tools Group

Coolant-Through Turning, Grooving, and Threading with High Pressure JCT Series Holders

Watch KYOCERA high-pressure JCT series holders in coolant-through turning, grooving, and threading operations. This video demonstrates the holders in machining applications, bringing together three operations that use coolant delivery through the tooling.

Drilling Versatility with the DRV Magic Drill with Radial Offset

See how the KYOCERA DRV Magic Drill uses radial offset to drill a larger hole with an existing tool. This demonstration drills a 0.697-inch hole in 1018 steel using a 0.688-inch drill, showing versatility for shops with a limited tool selection.

KGZ Small Diameter Cut-Off in 1010 Steel – PF Chipbreaker

Watch KYOCERA KGZ cut off a small-diameter 1010 steel workpiece with the PF chipbreaker for low-feed machining. This demonstration runs at approximately 490 sfm and 0.0012 ipr using a 0.551-inch-diameter workpiece. Coolant is recommended.

KGZ Small Diameter Cut-Off in 1045 Steel – PH Chipbreaker

Watch KYOCERA KGZ cut off a small-diameter 1045 steel workpiece with the PH chipbreaker for high-feed machining. This demonstration uses a 0.551-inch-diameter workpiece at approximately 490 sfm and 0.007 ipr. Coolant is recommended.

Hard Turning a Gear with KBN020 – Heavily Interrupted Machining

Watch KYOCERA KBN020 face a hardened 1045H steel gear at 58 HRC in heavily interrupted machining. This dry-cutting demo uses a CNGA433S00525ME insert at 390 sfm, 0.016-inch depth of cut, and 0.006 ipr.

ZBMT Series 25-Degree Profiling Tools

Watch KYOCERA ZBMT 25-degree profiling tools machine 4137 steel in five dry passes. The demo uses a ZBMT13T304GF PR1725 insert at 660 sfm, 0.032-inch depth of cut, and 0.007 ipr feed.

M-THREE (MEV) Multifunctional Milling Demo – Full Video

Watch KYOCERA’s M-THREE (MEV) cutter perform curved slotting, drilling with circular interpolation, helical interpolation, straight ramping, pocketing, and shoulder milling in 4140 steel at 28–32 HRC. The full demo shows several toolpaths with their corresponding cutting conditions.

M-THREE (MEV) Multifunctional Milling Demo

See KYOCERA’s M-THREE (MEV) cutter demonstrate multifunctional milling in 4140 steel at 28–32 HRC. This short machining video highlights applications including slotting, helical milling, shouldering, ramping, facing, and pocketing.

MFF Finishing Cutter Machining Demo

Watch KYOCERA’s 200 mm MFF finishing cutter machine a metal workpiece alongside a conventional cutter comparison. The on-screen conditions show 300 m/min cutting speed, 2,400 mm/min feed, and 0.1 mm depth of cut.

Categories

Tags

Categories

Tags

Search Articles

Categories

Tags

Share

Spindle Spotlight Newsletter

Popular Articles